Nortel-networks Application Server 53r 5300 00 Instrukcja Użytkownika Pobierz pdf (Strona 108)

108 Maintenance Releases

Procedure Steps

Step Action

Load the ServeRAID firmware upgrade CD into the CD-ROM

drive.

Log on to the server as the SSA role (ntsysadm).

Reboot the server.

4 If the operating system has been installed, change the boot

sequence so that the CD-ROM is the primary boot device by

doing the following:

•

When the BIOS information appears, press F12 to select the

boot sequence.

• Select CD-ROM as the primary boot device.

Otherwise, wait for the server to reboot.

The ServeRAID Manager screen appears. (This may take up to

two minutes.)

5 If an upgrade is not required, click OK to reboot server and

go to step 9. (The OK prompt does not always display. If this

happens, select File> Exit, and select Restart to reboot the

server.)

Otherwise, select Update to apply the update.

Attention: Do not power off the system during the update.

The ROM Update Wizard displays a firmware message.

6 Click OK.

7 Click Next to complete the update.

8 Click Finish.

The server reboots.

9 Remove the CD from the CD-ROM drive.

--End--

Application Server 5300

Nortel AS 5300 Installation

NN42040-300 01.04

4 November 2008

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 123 124

Brak uwag

Nortel-networks Application Server 53r 5300 00 Instrukcja Użytkownika Strona 108