Nortel Networks Nortel Contivity Secure IP Services Gateway 2700 Instrukcja Użytkownika Pobierz pdf (Strona 62)

62 Chapter 4 Installing option cards and DIMMs

NN46110-311 02.01

The first several times that you remove the front bezel, the bezel can stick

because the ball studs and socket clips are new.

To remove the top cover:

1 If the gateway is in an equipment rack, remove it from the rack.

a At the front of the chassis, remove the two panhead screws that secure the

bottom of the chassis to the equipment rack.

b Remove the VPN Router 2700 from the rack-mount shelf, and set it on a

sturdy surface.

2 Use a Phillips screwdriver to remove the four screws that secure the cover to

the chassis (Figure 21).

Figure 21 Removing the top cover

3 Slide the top cover forward approximately 1/4 inch.

CS260006A

Remove these 4 screws

Slide cover forward and lift up

Boot/Ready

Alert

Boot/Ready

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 107 108

Brak uwag

Nortel Networks Nortel Contivity Secure IP Services Gateway 2700 Instrukcja Użytkownika Strona 62